Call now+91-96000 32152
Mobile+91- 9840494208
0

CJ 90VST Jigsaw

Power Tools

Showing 41–80 of 321 results

  • CJ 90VST Jigsaw

    Specifications

    Capacity: Wood 90mm (3-1/2″)
    Capacity: Mild Steel Plate 8mm (5/16″)
    Capacity: Min. Cutting Radius 25mm (1″)
    Base Tilt Angle 45° Right / Left
    Power Input 705W (120V, 127V model: 630W)
    Length of Stroke 20mm (3/4″)
    No Load Speed (stroke) 850 – 3,000/min.
    Overall Length 228mm (9″)
    Weight 2.2kg (4.9lbs.)
    Standard Accessories Blade, Wrench, Carrying Case
    Read more
    Compare

  • CM 12Y Cutter

    Specifications

    Capacity: Wheel Dia. 305mm (12″)
    Capacity: Max. Cut Depth 100mm (4″)
    Capacity: Cut Depth per one cutting 50mm (1-31/32″)
    Power Input 2,400W
    No Load Speed 5,000/min.
    Arbor 22mm (7/8″)
    Overall Length 633mm (24-15/16″)
    Weight 11.5kg (25.3lbs.)
    Standard Accessories Dust Collection Adapter, Protective Goggles, Wrench
    Read more
    Compare

  • CM 4SB2 Marble Cutter

    Specifications

    Capacity: Wheel Dia. 110mm (4-3/8″)
    Capacity: Max. Cut Depth 34mm (1-3/8″)
    Capacity: Cut Depth per one cutting 20mm (25/32″)
    Power Input 1,320W
    No Load Speed 11,500/min.
    Overall Length 204mm
    Weight 2.8kg (6.2lbs.)
    Standard Accessories Water Plug, Rubber Connector, Wrenches, Vinyl Hose
    Read more
    Compare

  • CM 4ST Marble Cutter

     0.00₹

    Specifications

    Capacity: Wheel Dia. 110mm (4-3/8″)
    Max. Cut Depth 34mm (1-3/8″)
    Power Input 1,300W
    No Load Speed 13,000/min
    Overall Length 214mm (8-27/64″)
    Weight 2.9kg (6.4lbs.)
    Standard Accessories Wrench
    Select options
    Compare

  • CN 16SA Nibbler

     0.00₹

    Specifications

    Capacity: Steel 1.6mm (16ga)
    Capacity: Stainless 1.2mm (18ga)
    Min Cutting radius 5mm (3/16″)
    Power input 400W
    No load speed 2,300/min
    Overall length 250mm (9-7/8″)
    Weight 1.6Kg (3.5lbs)
    Standard Accessories Hex. bar wrench
    Select options
    Compare

  • Combi Hammer D25013K

    22mm 3 Mode Combination Hammer D25013K

    • Drilling 4-22mm diameter anchor holes into concrete and masonry
    • Impact stop for drilling in wood, steel, plastic and screwdriving applications
    • Rotation stop for light chiselling in concrete and masonry
    • Variable speed switch and full power in forward and reverse for total control
    • Very compact design and low weight
    • Same power in forward and reverse mode
    • Low vibration level
    • Mechanical clutch reduces sudden high-torque reaction should the bit jam
    • Soft grip on main handle for comfort and safety
    • 4m cord set
    Read more
    Compare

  • Combi Hammer D25113K

    26mm 3 Mode Combination Hammer D25113K

    • 2.5 ft-lbs of impact energy provides fast drilling and powerful chipping
    • 8.0 Amp motor provides high performance and overload protection
    • Reverse feature assists in the removal of fasteners
    • Variable speed allows for precise hole placement on work surface
    • Factory-set clutch reduces sudden, high torque reactions if bit jams
    • 360° side handle adjusts easily for preference or use in tight spaces
    Read more
    Compare

  • Combi Hammer D25601K

    45mm SDS-Max Combination Hammer D25601K

    • Ideal for drilling anchor fixing and through holes in concrete and masonry from 12 to 45 mm in diameter. Core drilling up to 100 mm
    • Chain drive improves durability and increases efficiency together with an oil filled gearbox to ensure total component lubrication and superior heat dissipation
    • Active Vibration Control system incorporating a floating rear handle and damped side handle to reduce vibration
    • Ergonomic, compact and slim line design maximises control and offers easy access to confined spaces
    • Rotation-stop for medium-light demolition applications
    • Unique dust sealing protection to prevent even the finest dust ingress into the hammer mechanism delivering high durability and extended tool life
    • Hammer mechanism is optimised by reducing the number of components and by improving dampening to deliver maximum impact energy and therefore the efficiency to drill into the hardest concrete
    • Efficient mechanism delivers impact blows directly to the bit without losses through excessive vibration and rebound dampening reduces stress to the tool
    • Soft rubber grip handles improve user comfort lowering fatigue during extended use
    • Electronic variable impact energy/speed for total control with smaller bits and light material
    • Lock-on switch for greater control when in chipping mode
    • Electronic service and brush wear indicator identifies when brushes need replacing and product should be serviced
    • Excellent power to weight ratio: 8 Joules of impact energy delivered by a 6.8 kg hammer
    • Magnesium housing for lower weight and excellent durability
    Read more
    Compare

  • COMBITOOL 160W CTM1010

    Features
    – Compact design, adjustable stand and flexible shaft for easy handling and optimal control
    – Spindle lock for quick and easy bit exchange
    – Storage case for clean and protective storage of machine and accessories
    – Variable speed for better control and precision use
    – Extra long power cable, 3 m

    Read more
    Compare

  • COMPRESSOR 2HP 1500W 50L CRM1046

    Ferm CRM1046 Air Compressor – Features:

    Powerful pump, less than 2 minutes to fill the tank to maximum pressure

    Multi use, pressure adjustment from 0-8 bar

    Silent direct drive induction motor for long life span

    With manometers for monitoring both tank and outlet pressure

    Oil lubricated

    Read more
    Compare

  • CR 13V2 Reciprocating Saw

     0.00₹

    Specifications

    Capacity: Pipe 130mm (5″)
    Capacity: Steel Plate 19mm (3/4″)
    Capacity: Wood 300mm (11-13/16″)
    Power Input 1,010W
    Length of Stroke 29mm(1-1/8″)
    No Load Speed(stroke) 0 – 2,800/min.
    Overall Length 435mm (17-1/8″)
    Weight 3.2kg (7.1lbs.)
    Standard Accessories Blade, Wrenches, Carrying Case
    Select options
    Compare

  • CS 40Y Chani Saw

     0.00₹

    Technical Specifications:

    Guide bar length 16 (400mm)
    Guide bar type  P016-50CR
    Voltage – 230v
    Power input – 2000 W
    No-load chain speed – 14.5m/s
    Type of chain – 91px-57 (Oregon)
    Chain Pitch – 9.53mm (3/8)
    Chain Gauge – 1.27 mm (0.05)
    Sprocket – number of teeth: 6 Oil pump
    Automatic Chain oil tank capacity – 150ml Overload protection  Electrical Chain brake  Manually actuated
    Weight (without cord)  5.4 kg
    Standard Accessories: 1x Guide Bar case 1x Guide Bar 1x Chain 1x Plug Chip

    Select options
    Compare

  • D 10VST Drill

     0.00₹

    Specifications

    Chuck Capacity 10mm (3/8″)
    Capacity: Steel 10mm (3/8″)
    Capacity: Wood 25mm (1″)
    Power Input 450W
    No Load Speed 0 – 3,200/min.
    Overall Length (with Keyed Chuck) 227mm (8-15/16″)
    Overall Length (with Keyless Chuck) 232mm(9-1/8″)
    Weight (with Keyed Chuck) 1.2kg (2.6lbs.)
    Weight (with Keyless Chuck) 1.3kg (2.9lbs.)
    Standard Accessories Chuck Wrench for Keyed Chuck
    Select options
    Compare

  • D 6SH Drill

     0.00₹

    Specifications

    Chuck Capacity 0.5-6.5mm
    Capacity: Steel 6.5mm (1/4″)
    Capacity: Wood 9mm (3/8″)
    Power Input 240W
    No Load Speed 4,200/min.
    Overall Length (with Keyed Chuck) 227mm (8-15/16″)
    Overall Length (with Keyless Chuck) 206mm(8-1/8″)
    Weight 0.9kg (2.0lbs.)
    Standard Accessories Chuck Wrench, Hook, Stopper
    Select options
    Compare

  • D-TECT 150 CNT
    The future of detection technology – Precision of the highest order
    • Ultra wideband radar sensor system for millimetre-accurate detection of ferrous/non-ferrous metals, live cables, wooden beams and plastic pipes such as floor and wall heating pipes
    • Precise detection of reinforcing steel in concrete up to 15 cm deep
    • Digital display of material properties and maximum permitted drilling depth
    Read more
    Compare

  • D26414 – LCD Heat Gun

     

    • Heavy Duty 2000W Heat Gun with LCD Display .
    • High quality motor delivers longer life
    • Variable temperature control with LCD display offers increments of 10°C
    • At 13,000 rpm max no load speed, it provides plenty of speed to complete the user applications.
    • Set and Forget temperature setting – Auto selects the last temperature selected when switching the unit on use
    • Thermal protection components prevents overheating for constant heat control.
    Read more
    Compare

  • DB 10DL Cordless Drill

     0.00₹

    Specifications

    Capacity: Soft Wood 18mm (11/16″)
    Capacity: Wood Screw 6mm dia. x 38mm (#14 x 1-1/2″)
    Capacity: Machine Screw 6mm (1/4″)
    Drive 6.35mm (1/4″) Hex Bit Shank
    Maximum Torque in Lock 10Nm (89 in.-lbs.)
    Torque Setting 1.0-6.0Nm (9-53in.-lbs.)
    Battery Voltage 10.8V
    Battery Capacity 1.5Ah
    Charging Time 40min.
    No Load Speed 0 – 400 / min.
    Overall Length 147mm (5 – 3/4″)
    Weight 0.8kg (1.8 lbs.)
    Standard Accessories Battery (BCL1015), Charger (UC10SFL), Driver Bit, Carrying Case
    Select options
    Compare

  • DC500 CORDLESS/CORDED WET/DRY VAC
    • Runs off of 12V-18V DEWALT battery packs or 120V AC
    • Gore™ wet/dry filter traps 99.7% of drywall dust
    • Wet/dry filter eliminates change overs
    • Washable filter; tap or water rinse to clean
    • Heavy-duty rubber hose provides durability and flexibility
    • Drain port on tank for easy emptying of liquids
    • On-board hose, cord, and accessory storage provides convenient transport and storage
    Read more
    Compare

  • DCD730M2 -13 MM Compact Drill/Driver
    • atest generation 14.4V XR Li-Ion compact drill driver featuring NEW XR Li-Ion battery technology
    • Ultra compact, lightweight design allows use in confined spaces
    • Two speed all metal transmission for increased runtime and longer tool life.
    • 14 position adjustable torque control for optimised precision when screwdriving Intelligent trigger design allows for total control of application.
    • Compact 13mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change with one hand
    • Bright white LED with delay feature for improved visibility and flashlight functionality
    • Improved ergonomic design and rubber grip increases user comfort
    • Li-Ion slide pack battery allows for superior insertion and removal
    • Multi voltage charger for use with 18V, 14.4V and 10.8V XR Li-Ion slide pack batteries
    • Steel belt clip and tough magnetic bit holder ensures strong storage solutions
    • Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster
    Read more
    Compare

  • Demolition Hammer D25580K

    5kg. Hex Shank Demolition Hammer D25580K

    • Ideal for light demolition, surface or preparation chiselling grooves, channels openings etc in brick, masonry and light concrete.
    • Demolition application in concrete and stone
    • Electronic speed and impact energy control for use in delicate/lighter materials
    • Floating rear handle.
    Read more
    Compare

  • Demolition Hammer D25901K

    10kg SDS-Max Demolition Hammer D25901K

    • SHOCKS – Active Vibration Control® Reduces vibration felt by the user at the handles . A Perform and Protect feature.
    • 14.0 Amp motor provides high performance and overload protection
    • Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life
    • Spring-loaded dust seals ensure longer tool life
    • Variable impact control dial (19 settings) ensures accurate impact energy depending on the application
    • Large on/off rocker switch allows for easy single finger operation
    • One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool
    • Variable position side handle allows 360° rotation and 150° adjustment for ease of use
    • In-line design for easy operation of tool in horizontal or vertical applications
    • SDS max tool holder with rubber dampers absorbs energy providing longer life
    Read more
    Compare

  • Demolition Hammer D25961
    • SHOCKS – Active Vibration Control® Reduces vibration felt by the user at the handles . A Perform and Protect feature.
    • 30 Ft-lbs impact energy provides maximum performance
    • 15 amp motor provides maximum power and overload protection
    • Soft start help the user maintain control of the tool
    • Rubber coated handles provide greater comfort and control
    • Wheeled Kit provides storage and ability to easily move the tool
    • Uses 1 1/8″ Demo Steel
    Read more
    Compare

  • Demolition Hammer M8600B 11/16″ : 17mm Hex Shank

    Special Features: Good Chipping performance, Rubber Grip, Compact six

    Packing Includes: Carry case, Side grip, Grease, Hex Shank bull

    Read more
    Compare

  • DH 24PG Rotary Hammers

     0.00₹

    Specifications

    Capacity: Concrete 3.4 – 24mm (1/8″ – 15/16″)
    Capacity: Steel 13mm (1/2″)
    Capacity: Core bit 25 – 50mm (1″ – 2″)
    Capacity: Wood 32mm (1-1/4″)
    Power Input 730W
    Bit Shank SDS-plus
    No-Load Speed 0 – 1,050min-1
    Full-Load Impact Rate 0 – 3,950min-1
    Impact force 2.7J
    Overall Length 367mm (14-7/16″)
    Weight (excluding cord) 2.7kg (6.0lbs.)
    Standard Accessories Side Handle, Depth Gauge, Carrying Case
    Select options
    Compare

  • DH 24PH Rotary Hammer

     0.00₹

    Specifications

    Capacity: Concrete 3.4 – 24mm (1/8″ – 15/16″)
    Capacity: Steel 13mm (1/2″)
    Capacity: Core bit 25 – 50mm (1″ – 2″)
    Capacity: Wood 32mm (1-1/4″)
    Power Input 730W
    Bit Shank SDS-plus
    No-Load Speed 0 – 1,050min-1
    Full-Load Impact Rate 0 – 3,950min-1
    Impact force 2.7J
    Overall Length 367mm (14-7/16″)
    Weight (excluding cord) 2.7kg (6.0lbs.)
    Standard Accessories Side Handle, Depth Gauge, Carrying Case
    Select options
    Compare

  • DH 26PB Rotary Hammer

     0.00₹

    Specifications

    Capacity: Concrete 3.4 – 26mm (1/8″ – 1″)
    Capacity: Steel 13mm (1/2″)
    Capacity: Core bit 25 – 50mm (1″ – 2″)
    Capacity: Wood 32mm (1-1/4″)
    Power Input 830W
    Bit Shank SDS-plus
    No-Load Speed 0 – 1,100min-1
    Full-Load Impact Rate 0 – 4,300min-1
    Impact force 3.2J
    Overall Length 367mm (14-7/16″)
    Weight (excluding cord)*4 2.8kg (6.2lbs.)
    Standard Accessories –
    Select options
    Compare

  • DH 26PC Rotary Hammer

     0.00₹

    Specifications

    Model DH26PC
    Capacity: Concrete 3.4 – 26mm (1/8″ – 1″)
    Capacity: Steel 13mm (1/2″)
    Capacity: Core bit 25 – 50mm (1″ – 2″)
    Capacity: Wood 32mm (1-1/4″)
    Power Input 830W
    Bit Shank SDS-plus
    No-Load Speed 0 – 1,100min-1
    Full-Load Impact Rate 0 – 4,300min-1
    Impact force 3.2J
    Overall Length 367mm (14-7/16″)
    Weight (excluding cord)*4 2.8kg (6.2lbs.)
    Standard Accessories Side Handle, Depth Gauge, Carrying Case
    Select options
    Compare

  • DH 28PBY Rotary Hammer

     0.00₹

    Specifications

    Capacity: Concrete 3.4 – 28mm (1/8″ – 1-1/8″)
    Capacity: Steel 13mm (1/2″)
    Capacity: Core bit 25 – 50mm (1″ – 2″)
    Capacity: Wood 32mm (1-1/4″)
    Power Input 850W
    No-Load Speed 0 – 1,100min-1
    Full-Load Impact Rate 0 – 4,300min-1
    Impact force 3.4J
    Overall Length 367mm (14-7/16″)
    Weight (excluding cord)*4 2.9kg (6.4lbs.)
    Standard Accessories –
    Select options
    Compare

  • Die Grinder M9100B 100mm(4″)

    Makita M9100B 6mm Die Grinder Power Tool Grinding Machine

    Read more
    Compare

  • Die Grinder RDG 25 6mm
    1. Long neck straight high speed grinder
    2. Double insulated

    Specifications

    Read more
    Compare

  • Dremel 290 Engraver

    PACKAGING CONTENTS

    • Dremel Engraver
    • 2 x Replaceable carbide engraving point
    • 1 x Diamond engraving tip
    • Creative engraving templates
    • Instruction manual
    Read more
    Compare

  • Dremel 300-1 30 Variable Speed Rotary Multitool

    This kit includes the Dremel 300-Series Multi-Tool and 30 accessories , all packed in a convenient bag. Because of the included accessories you can immediately start working with your Dremel.

    Read more
    Compare

  • Dremel 4000-1 -45Rotary tool with 45 accesories

    The Dremel 4000 variable speed rotary tool offers the highest performance and most versatility of all Dremel rotary tools. The increased strength of its motor plus electronic feedback circuitry enables consistent performance at all speed levels. Dremel 4000 can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. A slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position.   This kit includes the high performance 4000 multitool, with innovative features like electronic feedback, collet lock out function and an RPM bandwidth of 5000 to 35000. Additionally the kit includes the Flexshaft attachment, which is the ideal attachment for detailed work on hard to reach places. Next to the Flex Shaft attachment the kit includes 45 original Dremel accessories including SpeedClic.

    Read more
    Compare

  • Dremel 940 High Temprature Glue Gun

    The Dremel 940 is a high temperature (195 °C) glue gun with a drip-controlled exchangeable tip.

    With its removable cord the 940 can be used at any place without available power.

    Because of its good ergonomics (on/off switch, T-handle, stable base, extendable kickstand) and replaceable tip it is ideal for light

    DIY jobs around the house and outdoors, such as repairing furniture, gluing wood, ceramics, etc.

    Read more
    Compare

  • DS 10DFL Cordless Drill

     0.00₹

    Specifications

    Drill Chuck 10mm (3/8″) Keyless chuck
    Maximam Torque in Look 22Nm (195in-lbs.)
    Torque Setting 0.5-4.0Nm (4-35in-lbs.)
    Battery Voltage 10.8V
    Battery Capacity 1.5Ah
    Charging Time 40min.
    No Load Speed:High 0-1,300min-1
    No Load Speed:Low 0-300min-1
    Grip Perimeter 130mm (5-1/8″)
    Overall Length 188mm (7-12/13″)
    Weight 1.0kg (2.2lbs.)
    Standard Accessories Battery (BCL1015), Charger (UC10SFL), Driver Bit, Carrying Case
    Select options
    Compare

  • DS 14DL2 Cordless Drill

     0.00₹

    Specifications

    Drill Chuck 1.5-13mm (1/16-1/2″) Keyless
    Capacity: Mild Steel 13mm (1/2″)
    Capacity: Soft Wood 50mm (1-49/64″)
    Capacity: Wood Screw 8 x 75mm　(#20×3″)
    Capacity: Machine Screw 6mm (1/4″)
    Battery Voltage 14.4V
    No Load Speed:High 0-1,600/min.
    No Load Speed:Low 0-350/min.
    Torque Setting 2-8Nm (18-71in-lbs.)
    Overall Length 228mm (9-7/32″)
    Weight 2.0kg (4.4lbs.)
    Standard Accessories Charger (UC18YRL), Battery (BCL1430), Driver Bit, Carrying Case
    Select options
    Compare

  • DS 18DSFL Cordless Drill

     0.00₹

    Specifications

    Drill Chuck 2 – 13mm (5/64 – 1/2″) Keyless
    Capacity: Mild Steel 13mm (1/2″)
    Capacity: Soft Wood 38mm (1-1/2″)
    Capacity: Wood Screw (D x L) 6.8 x 50mm (#16 x 2″)
    Capacity: Machine Screw 6mm (1/4″)
    Battery Voltage 18V
    No Load Speed: High 0 – 1,250/min.
    No Load Speed: Low 0 – 450/min.
    Torque Setting 1 – 6Nm (9 – 52 in.-lbs.)
    Overall Length 228mm (8-31/32″)
    Weight 1.7kg (3.7lbs.)
    Standard Accessories Battery (BSL1815), Charger (UC18YGSL), Driver Bit, Carrying Case
    Select options
    Compare

  • DS 7DF Cordless Drill

     0.00₹

    Specifications

    Drill Chuck 0.8 – 10mm (1/32 – 3/8″) Keyless
    Capacity: Mild Steel 10mm (3/8″)
    Capacity: Soft Wood 15mm (19/32″)
    Capacity: Wood Screw (D x L) 5.1 x 32mm (#11 x 1-1/4″)
    Capacity: Machine Screw 6mm (1/4″)
    Battery Voltage 7.2V
    No Load Speed 0 – 6000/min.
    Max lock in torque 8Nm (71 in.-lbs.)
    Overall Length 195mm (7 – 31/64″)
    Weight 1.2kg (2.6lbs.)
    Standard Accessories 2 Batteries (BCC715), Charger (UC7sd), Driver Bit, Carrying Case
    Select options
    Compare

  • DS 9DVF3 Cordless Drill

     0.00₹

    Specifications

    Drill Chuck 0.8 – 10mm (1/32 – 3/8″) Keyless
    Capacity: Mild Steel 10mm (3/8″)
    Capacity: Soft Wood 21mm (13/16″)
    Capacity: Wood Screw (D x L) 5.8 x 45mm (#12 x 1-25/32″)
    Capacity: Machine Screw 6mm (1/4″)
    Battery Voltage 9.6V
    No Load Speed: High 0 – 840/min.
    No Load Speed: Low 0 – 280/min.
    Torque Setting 1 – 6 Nm (9 – 52 in.-lbs.)
    Overall Length 198mm (7 – 3/4″)
    Weight 1.5kg (3.3lbs.)
    Standard Accessories 2 Batteries (BCC915), Charger (UC18YG), Driver Bit, Carrying Case
    Select options
    Compare

  • DV 13VSS Impact Drill

     0.00₹

    Specifications

    Drill Chuck 1.5-13mm (1/16-1/2″) Keyless
    Capacity:Concrete 13mm (1/2″)
    Capacity:Steel 13mm (1/2″)
    Capacity:Wood 20mm (3/4″)
    Power Input 550W
    No Load Speed 0-2,900/min.
    Full Load Impact Rate 29,000/min.
    Overall Length 270mm (10-19/32″)
    Weight 1.4kg (3.1lbs.)
    Select options
    Compare